Compare KL-50, KL-100, KL-150 and KL-300
Select according to the quantity needed within your production window, pellet size and site infrastructure. A stated kg/h rating is not the same as guaranteed daily production.
| Specification | KL-50 | KL-100 | KL-150 | KL-300 |
|---|---|---|---|---|
| Stated production capacity, kg/h | 50 | 100 | 150 | 300 |
| Stated pellet diameter | 3 and 16 mm | Stated range 3–19 mm | 3 and 16 mm | 3 and 16 mm |
| Stated power, kW | 2.2 | 4 | 7.5 | 7.5 |
| Stated machine weight, kg | 190 | 350 | 600 | 1200 |
| Dimensions L × W × H, mm | 1000 × 500 × 1000 | 1250 × 600 × 1350 | 1350 × 650 × 1580 | 1420 × 1200 × 1580 |
| Warranty | 2 years | 2 years | 2 years | 2 years |
Technical data are manufacturer-stated figures from the supplied product sheet. Capacity and pellet sizes must be confirmed for the selected configuration and operating conditions. Different pellet sizes require suitable tooling/dies; not every size is necessarily included. Stated power does not confirm the total installed electrical load.
Explore the models

DRYICEJET KL-50
Stated capacity 50 kg/h. Pellets: 3 and 16 mm. 190 kg.
View KL-50 →
DRYICEJET KL-100
Stated capacity 100 kg/h. Pellets: Stated range 3–19 mm. 350 kg.
View KL-100 →
DRYICEJET KL-150
Stated capacity 150 kg/h. Pellets: 3 and 16 mm. 600 kg.
View KL-150 →
DRYICEJET KL-300
Stated capacity 300 kg/h. Pellets: 3 and 16 mm. 1200 kg.
View KL-300 →Dry ice for blasting and cooling
3 mm pellets are a common format for dry ice blasting. Larger pellet diameters can suit cooling and logistics, depending on the application. Clarify the required size and quality before choosing the machine and tooling.
Food, laboratory and medical applications can have specific requirements for CO₂ quality, hygiene and documentation. A pellet size or machine photograph does not establish that these requirements are met.
When should you consider on-site dry ice production?
On-site production can give you greater control over dry ice availability. Its economics depend on factors including liquid CO₂ supply, actual demand, production time, storage loss, operation and maintenance.
Compare your current purchases and deliveries with the complete setup needed for in-house production. Do not assess the investment from hourly machine capacity alone. No fixed saving or payback period is promised.
Frequently asked questions
Does the machine make dry ice from air or water?
No. KL machines use liquid CO₂ as feedstock. They are not water ice machines and do not capture CO₂ from ambient air.
Can I connect it directly to a standard socket?
Do not assume this. The catalog identifies three-phase power as part of the infrastructure but does not establish model-specific voltage, current or connection. Confirm the electrical version before ordering.
Are all pellet sizes and a CO₂ tank included?
These must be agreed. Dies/tooling, tank, piping, exhaust and installation are not automatically included. The final quotation should describe the supply.
How is the finished dry ice stored?
Use suitable insulated dry ice containers and plan handling and ventilation. Storage time and sublimation loss depend on conditions. Request container options with the machine quotation.
Before ordering: CO₂, power and installation
A pelletizer requires a liquid CO₂ supply. The supplied product catalog also identifies a CO₂ tank, three-phase power, gas exhaust, supply/support lines and space for production and storage. The gas supplier and machine supplier must clarify a compatible setup.
Voltage, current demand, CO₂ pressure and temperature, connections and any cooling requirements must be confirmed for the ordered model. The stated kW figure alone is not sufficient to size the electrical supply. Tank, piping, extraction, installation and commissioning are not automatically included.
Plan CO₂ gas exhaust, ventilation and any gas monitoring as part of the installation. Production and storage need suitable working procedures and protection against cold. Store dry ice in suitable insulated containers that allow gas to escape, never in gas-tight containers.
Warranty and delivery
The machine is offered with a 2-year warranty. Coverage and warranty terms are specified in the quotation. Supplied configuration, included equipment, freight, delivery time and any installation or training requirements are clarified before ordering.
Service and operator training
We do not just deliver the machine. Tørrisblåsing Møre og Romsdal AS services the DRYICEJET production machines we sell and trains your operators to run them safely.
Training covers start-up and shutdown, die changes, CO₂ and cold-contact safety, handling and storing the finished dry ice, and routine maintenance. We use dry ice every day in our own blasting work, so we know what good pellets need. Contact us for maintenance, troubleshooting or repairs. The scope of installation support, training and service is agreed in the quotation.
Request a dry ice production quotation
Include your preferred model, daily and weekly dry ice demand, required pellet size and expected operating hours. Describe available liquid CO₂, electrical supply and production site. Include the delivery location and any dry ice container requirements.
Need the dry ice for cleaning?
We also sell DRYICEJET dry ice blasting machines and SWT laser cleaning machines, and we carry out dry ice blasting as a service across Norway.